Description

Dimensions

• Dimensions: 8 × 11 × 17 inches (15 × 28 × 3 cm)
• Weight: 15 lbs (6.4 kg)

Output Characteristics

• Cut: 2400 Max (open circuit) P-P Voltage, 300 Rated Load ohms, 200 Nominal Power at rated load watts, 1.8 @ 100 W Crest Factor at rated load typical
• Blend 1: 2800 Max (open circuit) P-P Voltage, 300 Rated Load ohms, 175 Nominal Power at rated load watts, 2.7 @ 100 W Crest Factor at rated load typical
• Blend 2: 3200 Max (open circuit) P-P Voltage, 300 Rated Load ohms, 150 Nominal Power at rated load watts, 3.3 @ 100 W Crest Factor at rated load typical

Output Waveform

• Cut: 500 kHz Sinusoid
• Blend 1: 500 kHz bursts, 50% Duty Cycle, 31 kHz Recurrence
• Blend 2: 500 kHz bursts, 37.5% Duty Cycle, 31 kHz Recurrence
• Blend 3: 500 kHz bursts, 25% Duty Cycle, 31 kHz Recurrence
• Coag: 500 kHz bursts, 31 kHz Recurrence
• Bipolar: 500 kHz bursts, Unmodulated Recurrence

Low Frequency Leakage (50 / 60 Hz)

• Normal polarity: intact chassis ground: < 10 mA, ground open; < 100 mA
• Reverse polarity: ground open: < 100 mA. Sink current, 140V applied, all inputs; < 150 mA. Chassis source current, ground open; < 110 mA

High Frequency Risk Parameters

• Bipolar and Monopolar RF leakage current: < 150 milliamperes

High Frequency Risk Parameters

• Bipolar and Monopolar RF leakage current: < 150 milliamperes

REM Contact Quality Monitor

• Measurement frequency: 140 kHz ± 10 kHz
• Measurement current: 1.5 mA ± 0.5 mA

Input Power Source

• Nominal input line voltage is 120 VAC with a full range of 85-135 VAC. Frequency line varies from 45 to 65 Hz
• Idle: 0.5 A (Max. Current), 60 W (Max. Power)
• Cut: 5.0 A (Max. Current), 600 W (Max. Power)
• Coag: 30 A (Max. Current), 300 W (Max. Power)
• Bipolar: 1.5 A (Max. Current), 180 W (Max. Power)