Description

Dimensions

• Dimensions: 6 × 11 × 17 inches (15 × 28 × 43 cm)
• Weight: 5 lbs (6.8 kg)

Output Waveform

• Cut: 516 kHz sinusoid
• Blend 1: 516 kHz of sinusoid at 70% duty cycle recurring at 31 kHz
• Blend 2: 516 kHz bursts of sinusoid at 45% duty cycle recurring at 31 kHz
• Blend 3: 516 kHz bursts of sinusoid at 20% duty cycle recurring at 31 kHz
• Coag: 516 kHz damped sinusoidal bursts with a repetition frequency of 31 kHz
• Micropolar: 516 kHz sinusoid, unmodulated

Output Characteristic

• Cut: 2400 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 200 Nominal Power at rated load watts; 1.8 @ 100 W Crest Factor at rated load typical
• Blend 1: 2800 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 175 Nominal Power at rated load watts; 2.7 @ 100 W Crest Factor at rated load typical
• Blend 2: 3200 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 150 Nominal Power at rated load watts; 3.3 @ 100 W Crest Factor at rated load typical
• Blend 3: 3600 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 125 Nominal Power at rated load watts; 4.6 @ 100 W Crest Factor at rated load typical
• Coag: 5200 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 75 Nominal Power at rated load watts; 8.0 @ 50 W Crest Factor at rated load typical
• Micropolar: 900 Max. (open circuit) P-P voltage; 100 Rated Load ohms; 50 Nominal Power at rated load watts; 1.8 @ 40 W Crest Factor at rated load typical

Power

• (Max. operating range: 85-135 or 170-270 VAC; Nominal operating range: 110-120 or 220-240 VAC)
• Idle: 0.5 A Max. Current; 60 W Max. Power
• Cut: 5.0 A Max. Current; 600 W Max. Power
• Coag: 3.0 A Max. Current; 400 W Max. Power
• Micropolar: 2.0 A Max. Current; 180 W Max. Power

Line Regulation

• Between 85-135 volts or 170-270 volts input, output power into nominal load will vary no more than 20% or 5 watt, whichever is greater

REM Contact Quality Mon.

• Measurement frequency: 140 kHz ± 20 kHz. Measurement current: 3.0mA, maximum

Low Frequency Leakage

• Source current nominal polarity, intact chassis ground: <10 µA, ground open: <50 µA. Source current reverse polarity, ground open: <50 µA. sink current, 135 VAC applied, all inputs: <20 µ A. Chassis source current, ground open: <100 µA

Low Frequency Leakage

• Source current nominal polarity, intact chassis ground: <10 µA, ground open: <50 µA. Source current reverse polarity, ground open: <50 µA. sink current, 135 VAC applied, all inputs: <20 µ A. Chassis source current, ground open: <100 µA
• Micropolar RF leakage current: <150 mA. Monopolar RF leakage current: <150 mA