Description
Defibrillator
- Height: 5.75” (14.6 cm)
 - Width: 13.1” (33.3 cm)
 - Depth: 10.5” (26.7 cm)
 - Weight: 13.2 lbs (5.99 kg)
 
Pacemaker (Pacer version)
- Type: VVI demand; asynchronous (fixed rate) when used without ECG leads or in ASYNC pacing mode
 - Pulse Type: Rectilinear, constant current
 - Pulse Shape and Duration: Rectilinear, 40 milliseconds ±2 milliseconds
 - Pulse Amplitude: Variable 0 mA to 140 mA ±5% or 5 mA, whichever is greater Digitally displayed on the monitor (increments or decrements by a value of 2 mA)
 - Pacing Rate: Variable from 30 ppm to 180 ppm ±1.5% (increments or decrements by a value of 2 ppm)
 
Defibrillator
- Waveform: Rectilinear Biphasic
 - Energy Selection: Adult Mode: Selectable at 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 50, 70, 85, 100, 120, 150, 200 J (Delivered into 50 Ω load). Selected using controls on sternum paddles or unit front panel.
 - Charge Time: 6-40 seconds depending on battery life and amount of joules selected.
 - Patient Impedance: Min: 15 oms; Max: 250 ohms
 - Energy Display: Monitor display indicates both selected and delivered energy
 
ECG Monitoring
- Patient Connection: 3-lead ECG cable, 5-lead wire ECG cable, paddles or MFE Pads. Selectable by front panel switch.
 - Input Protection: Fully defibrillator-protected. Special circuit prevents distortion of ECG by pacer pulse. (Pacer version only).
 - Bandwidth: 0.67 Hz – 21 Hz (-3 dB) standard/0.05 Hz – 150 Hz Diagnostic 0.67 Hz – 27 Hz and 1 Hz – 21 Hz user-configurable
 - Lead Selection: Displayed on monitor
 - ECG Size: 0.5, 1, 1.5, 2, 3 cm/mV (Centimeter per millivolt) display on monitor
 - Heart Rate: Digital display; Range: 0 bpm – 300 bpm; Accuracy: ±5%
 
CPR Monitoring
- Compression Depth: 0.75 to 3 inches ±0.25 inches 1.9 to 7.6 cm ±0.6 cm
 - Compression Rate: 50 to 150 compressions per minute
 
Display
- Screen Type: High resolution, color liquid crystal display (LCD)
 - Screen Size: 5.63 inches (14.3 cm) diagonally
 - Sweep Speed: 25 mm/s
 - Viewing Time: 4 seconds
 
Recorder
- Paper: 80 mm thermal (grid width); 90 mm (paper width)
 - Speed: 25 mm/s or 50 mm/s (apparent), configurable for 12 lead output
 - Delay: 6 seconds
 - Annotations: Time, date, defib energy, heat rate, pacer output (Pacer version only), QRS sync marker, ECG SIZE, lead, alarm, DEFIB TEST OK/FAIL, ANALYZE ECG, PADS OFF, ANALYSIS HALTED, NOISY ECG, SHOCK ADVISED, NO SHOCK ADVISED, ECG TOO LARGE, and diagnostic bandwidth.
 - Printing Method: High resolution, thermal array print head
 - Print out Modes: Manual or automatic; user-configurable
 - On/Off Control: Front panel and paddle
 
PCMCIA Card
- Capacity: Standard Series II Flash card – 2, 4, 16, or 32 Mb
 - Audio Recording: Digital compressed audio data
 
Battery Packs
- Lithium Ion
- Weight: 1.5 lbs (0.68 kg)
 - Voltage: 4.2 Volts per cell; 3 cells wired in series
 - Recharge Time: 7 hours or less with integral charger
 
 - Rechargeable, Sealed Lead Acid
- Weight: 2.2 lbs (1 kg)
 - Voltage: 2 volts per cell; 5 cells wired in series
 - Charge Time: 4 hours or less witn integral charger
 
 
					
					
					
        
		




Reviews
There are no reviews yet.