Description

Dimensions

Incubator with Elevating Base:

• Height: Overall height 54 to 62 inches (136.2 to 157.5 cm)
• Elevating base adjustable from 35 to 43 inches (88.9 to 109.2 cm) mattress to floor
• Depth: 71.1 cm/28 in
• Width: 83.8 cm/33 in
• Weight: 89 kg/195 lb

Incubator with Elevating Base:

• Height: Overall height 54 to 62 inches (136.2 to 157.5 cm)
• Elevating base adjustable from 35 to 43 inches (88.9 to 109.2 cm) mattress to floor
• Depth: 71.1 cm/28 in
• Width: 83.8 cm/33 in
• Weight: 89 kg/195 lb

Drawer Packages for Elevating Base or Stationary Pedestal:

• Overall: 28 x 29 x 46 cm/11 x 11.5 x 18.25 in
• Single deep drawer: 25 x 23 x 42 cm/10 x 9 x 16.5 in
• Dual drawer: 11 x 23 x 42 cm/4.5 x 9 x 16.5 in

Incubator with Cabinet:

• Height: 141 cm/55 in
• Depth: 64.6 cm/25.5 in
• Width: 88.9 cm/35 in
• Weight: 84 kg/185 lb

Incubator Characteristics:

• Casters: 5 inch diameter, 2 locking, 2 non-locking
• Mattress: 34.8 x 65 cm/13.7 x 25.6 in
• Mattress to Hood: 16 in/41 cm
• Door Height: 11 in/28 cm
• Tilt: 0°, 3° and 6° (CP 3000)
• Positions: Continuous from 0° to 12° (CP 4000)
• Port holes: 6
• Tubing ports: 6

Electrical Power Requirements

• 120 Vac 60Hz
• Models: 115 V ±10% 5.7 amps
• Conforms to IEC 601.1, UL 544 and CSA 22.2 No. 125 requirements
• Nominal power consumption: 450 watts at maximum heater output
• Line voltage compensation: Input voltage is monitored and the heat output is adjusted to compensate for line voltage variations
• Leakage currents: Less than 100 micro amps on 120V units
• Leakage at patient probe: Less than 50 micro amps on 120V unit

Operation Enviroment

• Operating temperature range: 20° to 30°C/68° to 86°F
• Storage temperature range: -25° to 60°C/13° to 140°F
• Operating humidity range: 0 to 90%

System Control Characteristics

• Microprocessor based control system: Self-test functions are performed at power-up and during normal operation
• Patient Control (Servo) Mode: 35° to 37°C/95° to 98.6°F
• Air Control (Manual) Mode: 20° to 37°C/73.4° to 98.6°F
• Up to 39°C/102.2°F with control panel override switch
• Air Velocity: Average <10 cm/sec with inner wall
• Temperature variability: Less than ±0.3°C
• Resolution: ±0.1°C or 0°F
• Probe interchangeability: ±0.1°C/0.2°F
• Average oxygen input concentration range:
  • 5 L/min 25 to 45%
  • 10 L/min 35 to 65%
  • 15 L/min 45 to 70%
• Humidification: Standard – 10 to 75% dependant on nursery environment and incubator temperature setting
• Servo – 40