Description

Ventilator Dimensions

• Height: 11 in
• Width: 13.5 in
• Depth: 10 in

Graphic Display Dimensions

• Height: 9.5 in
• Width: 13 in
• Depth: 2.5 in
• Weight: 5.5 lbs

Pedestal Stand Dimensions

• Height: 40.5 in
• Width: 24 in
• Weight: 9 lbs.

Compressor Dimensions

• Height: 36 in
• Width: 22 in
• Depth: 21.5 in
• Weight: 11o lbs

Environmental

• Temperature
  • Storage and Shipping -40 to 158 ºF (-40 to 70 ºC)
  • Checkout and Operating 50 to 104 ºF (10 to 40 ºC)
• Altitude
  • Checkout, Operating, Transport and Storage 0 to 9,000 feet (14.7 to 10.5 PSIA/760 to 543 mm Hg)
• Humidity
  • Storage and Shipping 0 to 99% Relative Humidity — Non-condensing
  • Checkout and Operating 0 to 95% Relative Humidity — Non-condensing

Controls

• Mode: Flow Cycle AC, AC, SIMV/IMV, SIMV/PSV, Flow Cycled SIMV CPAP/PSV
• Rate: 1 to 150 bpm
• Inspiratory Time: 0.1 to 3.0 sec
• PEEP: 0 to 30 cmH2O
• Inspiratory Pressure: 0 to 72 cmH2O
• Manual Breath: x1
• Assist Sensitivity: 0.02 to 5.0 L/min
• Over Pressure Relief: 15 to 75 cmH2O
• % O2: 21 to 100%
• Apnea Alarm (selectable): 5, 10, 20 or 30 sec

Monitors

• Breath Rate: 0 to 255 bpm
• Patient Initiated Indicator: LED
• Minute Volume: 0 to 30.0 L/min
• Tidal Volume: 0 to 500 ml (Inspired and Expired)
• %Tube Lea:k 0 to 100%
• Inspiratory Time: 0.1 to 3.10 sec
• Expiratory Time: 0 to 99.9 sec
• I:E Ratio: 9.1 to 1:9.9
• Peak Inspiratory Pressure: 0 to 99 cmH2O
• Mean Airway Pressure: 0 to 75.0 cmH2O
• PEEP: 0 to 30.0 cmH2O
• Air Pressure: 0 to 100 psig
• O2 Pressure: 0 to 100 psig
• Proximal Airway Pressure: 10 to 100 cmH2O (Gauge)
• Hourmeter: 0 to 99,999 hours
• Test: Push button

Alarms / Limits

• High Breath Rate: 3 to 255 bpm
• Low PEEP/CPAP: -5 to 30 cmH2O
• Low Inspiratory Pressure: 0.25 (High Pressure Limit – Low PEEP/CPAP) + Low PEEP/CPAP
• Patient Circuit: LED On/Off
• Failed to Cycle: On/Off
• Low Gas Supply: LED On/Off
• Apnea: LED On/Off
• Pressure Settings Incompatible: LED On/Off
• Prolonged Inspiratory Pressure: LED On/Off
• Flow Sensor: LED On/Off
• Low Battery: LED On/Off
• Alarm Silence: 60 sec
• Visual Reset: Push Button
• High Pressure Limit: 10 to 75 cmH2O
• Line Power: Green/Red LED

Electrical

• Voltage
  • 100 V – 80 to 110 VAC
  • 120V – 96 to 132 VAC
  • 220V – 176 to 242 VAC
  • 240V – 192 to 264 VAC
• Current
  • 100V – 1.0 A maximum
  • 120V – 1.0 A maximum
  • 220V – 0.5 A maximum
  • 240V – 0.5 A maximum
• Frequency
  • 100V – 50.60 Hz
  • 120V – 50/60 Hz
  • 220V – 50/60 Hz
  • 240V – 50/60 Hz
• Fuses
  • 100/120V – T o.5 A, 5 x 20 mm
  • 230/240V – T 0.5 A, 5 x 20 mm
  • (For 220V operation, set the power entry module seclector switch to 230V setting)